The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

04 orange · 03-25-2007, 10:51 PM

Well i got finished up with the re z today. Decided to make it 3". Now the Frame rails are about 2" of the ground in the front, that is with it bare frame. I thinking that it will go down another 1" with everything on it. What do yall think.

Another question that I have is, do aftermarket control arms upper and lower give any amount of drop. Because I am using the stock ones with the suicide doors bag plates, and cups. I have cut an 1" off the cups already.

03-25-2007, 10:51 PM	#21
04 orange Registered User Join Date: Sep 2006 Location: Midlothian, Tx Posts: 144	Re: Not sure what to do about my z'd Frame Well i got finished up with the re z today. Decided to make it 3". Now the Frame rails are about 2" of the ground in the front, that is with it bare frame. I thinking that it will go down another 1" with everything on it. What do yall think. Another question that I have is, do aftermarket control arms upper and lower give any amount of drop. Because I am using the stock ones with the suicide doors bag plates, and cups. I have cut an 1" off the cups already.