The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vfrdude · 11-26-2002, 02:09 PM

It's a 3/4 drop - 4" drop springs on the rear, 2.5" drop tubular lower control arms + 1/2" drop spring. I initially had 4" drop spring in the front, but I couldn't get the alignment right, and It was just low enough for the front bumper to scrap on little dips on the freeway.

The combination of the longer springs and the extra inch in ground clearance made all the difference in the world...

11-26-2002, 02:09 PM	#194
vfrdude Registered User Join Date: May 2002 Location: Oakley, Ca. USA Posts: 137	It's a 3/4 drop - 4" drop springs on the rear, 2.5" drop tubular lower control arms + 1/2" drop spring. I initially had 4" drop spring in the front, but I couldn't get the alignment right, and It was just low enough for the front bumper to scrap on little dips on the freeway. The combination of the longer springs and the extra inch in ground clearance made all the difference in the world... __________________ Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it!