The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - anyone just replace coils with bags only?

jimmydean · 04-04-2007, 03:29 PM

If you replace the front without drop spindles, but cut the lower cup down, it will sit the same height as mine does now.

If you replace the rear without a notch, you will not be able to drive it unless you have the bag nearly full because you will hit frame.

I have not notched my frame, but have a 3" cup in the back so the back is doesn't hit.

<edit> That picture is aired out, not ride height.

04-04-2007, 03:29 PM	#2
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: anyone just replace colis with bags only? If you replace the front without drop spindles, but cut the lower cup down, it will sit the same height as mine does now. If you replace the rear without a notch, you will not be able to drive it unless you have the bag nearly full because you will hit frame. I have not notched my frame, but have a 3" cup in the back so the back is doesn't hit. <edit> That picture is aired out, not ride height. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 Last edited by jimmydean; 04-04-2007 at 03:30 PM.