The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RACINJASON22 · 04-09-2007, 08:48 PM

These heads were a first read for me. IMO they are pretty serious heads. BTW may I add good Pricing!

That will require healthy cam profile to get there full potential.

What type of engine platform are you looking to build street/strip or daily driver, race? A little more info please.

They seem to have some high cc volume runners IMO for street use.
Exept for the 197's. They would be more than capable to build a serious street driven SBC.

Some one may have better first hand knowlege of these pieces. THey almost have a look of the Pro Top line castings being sold under many other names but, I'm not real sure. Anyone else?

Other than that I have always been happy with Jeg's customer service so it might be worth checking into IMO.

04-09-2007, 08:48 PM	#2
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: heads from Jeg's These heads were a first read for me. IMO they are pretty serious heads. BTW may I add good Pricing! That will require healthy cam profile to get there full potential. What type of engine platform are you looking to build street/strip or daily driver, race? A little more info please. They seem to have some high cc volume runners IMO for street use. Exept for the 197's. They would be more than capable to build a serious street driven SBC. Some one may have better first hand knowlege of these pieces. THey almost have a look of the Pro Top line castings being sold under many other names but, I'm not real sure. Anyone else? Other than that I have always been happy with Jeg's customer service so it might be worth checking into IMO. __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR! Last edited by RACINJASON22; 04-09-2007 at 08:49 PM.