Re: Wiper arm removal!!
To remove the wiper arm.
1 Mark the position of the wiper blade on the windshield with some masking tape.
2 Remove the washer hose.
3 Lift the wiper arm from the windshield.
4 Disengage the retaining latch/tab @ the base of the wiper arm with a screwdriver outward.
5 Remove the wiper arm from the transmission drive shaft/post.
6 Reverse the proceedures above to reinstall using the tape mark on the windshield as your alignment referance.
Last edited by 87 STEPPER; 04-14-2007 at 03:05 PM.
|