|
Re: How to build a heavy hauler?
Bob was refering you to 3/4t(8-lug)drop spindles.The thing is,that will only put your rear up more(visual effect).You said you wanted to level it out a bit.You can only drop the rear so much before "C" notching the frame.Not exactly a strengthening proceedure for heavy hauling.And,the only way to bring the rear down more than an inch or two would be to reduce spring capacity.Unless it`s a leaf sprung truck.If it is,you can do an axle-flip,but will require a "C" notch.I`m sure you can notch and beef it up as strong,if not stronger.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"
GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim
"Don't call me a redneck. I'm a rough cut country gentleman"
R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
|