[kwhite4]

I now have a full Moser rear assembly Fab style rear but I did have a 9 out of a 1966 Ford truck and it fit right in. Only .25 inches longer than the 10 bolt .
Problems are on the truck rear
1 bolt pattern is 5.5 in most cases (can get redrilled for +- 100)
2 rear is not centered in most cases driveshaft will run to the pass side and you will have to cut the cross member some to clear.

My truck had leaf springs so all I had to do is move the pads on the rear some
might be more difficult on the bar type rear.

Again most of the issues I had were on a 1966 rear newer rears may be different.

The fan schroud got damaged when i put it up in the rafters of my shop sorry didnt realize i broke it.