The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Boog** · 04-19-2007, 10:42 PM

I assume you are wanting to size it with a tire on it? Don't know about casting #'s. If no tire on it just lay a tape measure across the wheel lips and measure the distance in between the lips where the tire bead seals to it. Should be a 6 1/2, 7 or 8 inch width iirc. Any wider then it's an aftermarket wheel.

04-19-2007, 10:42 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,674	Re: Truck Ralley ID?! I assume you are wanting to size it with a tire on it? Don't know about casting #'s. If no tire on it just lay a tape measure across the wheel lips and measure the distance in between the lips where the tire bead seals to it. Should be a 6 1/2, 7 or 8 inch width iirc. Any wider then it's an aftermarket wheel. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross