The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Drilling six lug pattern in a brake rotor

*Fast68Chevy* · 03-23-2002, 01:59 PM

but if you wante dto do it then you oculd use a 4x4 rotor or 6 lug drum for holes pattern and weld up the 5 holes and grind smoooth and then dril 6 holes

can be done if you have the welder and grinder

------------------
-71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it-
-'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies

03-23-2002, 01:59 PM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	but if you wante dto do it then you oculd use a 4x4 rotor or 6 lug drum for holes pattern and weld up the 5 holes and grind smoooth and then dril 6 holes can be done if you have the welder and grinder ------------------ -71/C-10(thx teeitup and crews!)350 4+4/CH465(thx 71Chev, GMCPaul, and CPNE)longfleet bed(thnx meathead95)!still building it- -'84 Z28(Z28) 1G1AP87GXEL100000 with H.O. 305/4bbl/190net/hp(L69) 3.73 rear(GT4/YC4) 700R4(MD8-MXO) & other goodies -79 G20 pass van, 350/th350/10bolt, paint is overrated Randy- Lincoln, IL r68c30@hotmail.com © RSS Enterprises 2000