Quote:
Originally Posted by jorgensensc
I might be purchasing a set of new/used Bell tech drop spindles. The catalog says they are 3" drop. I have read a little difficulty with this drop on other posts. Will this spindle work with 15" x 6" steel wheels? Going for a shop truck look, but have heard some grinding necessary for the 15" wheels. Is that only the 15" x 8" wheels? Educate me.
Thanks
Shawn
|
Yes you will be grinding away some of your lower control arm for clearence issues.
I did a 3"/4" using the DJM lower control arms so I wouldnt have to go through all that.
And at the present time Im rollin on 15" still, pretty smooth no grinding what so ever.
Is faster, good product, and new all joints too.
and My next step is to toss in a set of 2" coils and flip the rear, and tadaa.
__________________
*79 C10 Short Box ST8 6 bang'r *
*Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT
*__--__*
79 C-10 project*
.........................__
..............._____ l __\___
..............|_(O)_ |___(O) ]
FAQ INDEX Thread
The Kulture
My Rat Den