Re: Spindles STUCK!
If you haven't done so all ready hit them with some penatrating oil like PB Blaster or Marvils Mistry Oil, Note: WD40 Isn't penatrating oil let them soak for an hour and then smack the hell out of the spindle boss that the bolt passes through with the biggest and heavyist hammer you have.
If they still don't brake lose then use some heat like a propane torch or a Oxy/acetylene welder torch if ya have one.
Apply the heat to only the spindle boss that the bolt passes through so it will expand and the bolt will stay the same size then shack the hell out of it with that hammer you have.
That should do it.
If not your SOL.
|