|
Re: Front Cups
Quote:
Originally Posted by 72BLAZERDUDE
I got front cups from Suicide Doors and they dont seem to sit all the way down in the spring pockets on my 72. Has anybody else had this problem. It looks like i need to grind a taper on the bottom to fit down flat since the spring pocket is tapered. Also am I supposed to bolt the lower conrtol arm to the bottom of the bag through the cup or bolt the cup to the bag and allow the trucks weight to keep the cup in the spring pocket.
|
Grind the cups so they fit your control arm. Some guys take more off as they're trimming them to fit in an effort to gain more drop.
Bolt the cups to the bags & allow the trucks weight to keep them in position.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|