The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Vintage Air ? Can I install after my truck is finished?

Old Chevy · 12-06-2002, 10:09 AM

You can install it afterwards, however, if I remember right, there is a supporting bolt on the back(front using direction of truck) that can be a b*tch to get to, and that was before closing off the firewall. I wanted to use bulkhead connectors in the firewall, but, the connectors on the a/c unit were too close to the firewall to allow this to be arranged.
Good luck with your project

Cheers

Richard

12-06-2002, 10:09 AM	#2
Old Chevy Registered User Join Date: Jan 2000 Location: Tulsa, Oklahoma Posts: 498	You can install it afterwards, however, if I remember right, there is a supporting bolt on the back(front using direction of truck) that can be a b*tch to get to, and that was before closing off the firewall. I wanted to use bulkhead connectors in the firewall, but, the connectors on the a/c unit were too close to the firewall to allow this to be arranged. Good luck with your project Cheers Richard __________________ Broken Arrow, OK. 1977 Corvette, ZZ4 Crate, new interior, new suspension, new driveline, you get the picture, (new project / daily driver)