The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bigtruck81 · 05-29-2007, 10:22 PM

you need to pull the entire front clip off, and the engine and trans out. you're gonna need to install a 2wd trans anyways, so just pull the motor out too while you're at it. yank the engine crossmember out, as well as the motor mount towers, and bolt the IFS crossmember in place. if you wanna do an awesome job of it, buzz the rivets out of the shackle hanger brackets and fill the hole where the bushing used to be, and buzz the front spring hanger off of the bottom of the body mount.

05-29-2007, 10:22 PM	#11
bigtruck81 Registered User Join Date: Feb 2004 Location: northern, in Posts: 350	Re: blazer 2 wd convert you need to pull the entire front clip off, and the engine and trans out. you're gonna need to install a 2wd trans anyways, so just pull the motor out too while you're at it. yank the engine crossmember out, as well as the motor mount towers, and bolt the IFS crossmember in place. if you wanna do an awesome job of it, buzz the rivets out of the shackle hanger brackets and fill the hole where the bushing used to be, and buzz the front spring hanger off of the bottom of the body mount.