Quote:
Originally Posted by rambler
same here,, I have a 72 with a 4 speed granny low, all complete thats my parts truck,
|
You actually don't need a manual tranny crossmember. The crossmember used for the granny 4 speeds are mounted quite a bit forward and wont work farther back. I used a crossmember out of a 3/4 ton with a TH400 on my M-22 and it worked perfect. I just had to get it centered and drill some holes. You will definately have a driveline issue though. I was able to take my beefy one piece with a slip yoke and have it cut down to have the yoke attached to the driveline like a car is. It's now bullet proof and you can see by its size.
