Quote:
Originally Posted by Sport/Truck
To be honest, I haven’t used any ass'y lube. The short block was assembled at the shop. But I’ll check- I think I have some of the Lubriplate 105.
So just squeeze some in the out let hole and I should be good. So should I torque the bolt with dry or oiled threads?
s/t
|
Ah, no worries. If you haven't bolted on the heads, I would put a little Lubriplate or GM EOS on the bores.
Yep, just squeeze it in the hole to be sure it's never dry. If it's an ARP bolt, then you should use ARP lube - anything else should be oil or Vasaline. You won't get proper torque with a dry bolt.