The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What did you get done this weekend? 6/03/07

RetroSBK · 06-04-2007, 10:43 AM

finished the wiring at the battery, finally deleting the wiring from the firewall that went to the marker lights. Trying to redo all of the underhood in shrink tube and route it sano.

Got home friday afternoon to run off to the big Santa Paula cruise, only to find the Holley carb puking fuel... So, had to swap it to an edelbrock POS I had laying around... Talk about a HUGE difference in performance! a huge DROP! Cruised it Friday night, put some new jets in the holley, and changed out the broken power valve.

Had my painter come over sat and tell me I should just get a new hood, and then sunday while cruising around, had the ride height switch for the air bags fail. Thank god I listened to my brother and set the fail safe to freeway height, and not fully dumped!!

so lots more to do NEXT weekend!

06-04-2007, 10:43 AM	#7
RetroSBK Registered User Join Date: Jan 2007 Location: Camarillo, CA Posts: 64	Re: What did you get done this weekend? 6/03/07 finished the wiring at the battery, finally deleting the wiring from the firewall that went to the marker lights. Trying to redo all of the underhood in shrink tube and route it sano. Got home friday afternoon to run off to the big Santa Paula cruise, only to find the Holley carb puking fuel... So, had to swap it to an edelbrock POS I had laying around... Talk about a HUGE difference in performance! a huge DROP! Cruised it Friday night, put some new jets in the holley, and changed out the broken power valve. Had my painter come over sat and tell me I should just get a new hood, and then sunday while cruising around, had the ride height switch for the air bags fail. Thank god I listened to my brother and set the fail safe to freeway height, and not fully dumped!! so lots more to do NEXT weekend! __________________ 1970 C10, shortened long bed, Alum Headed full roller 383 (with Victor, 750DP, stainless rockers, behive springs, CNC ported heads) TCI SSF 700R4, 4.10 Posi, Bagged on C-Notch and 2.5 spindles. Air Cond, black out tint, satin black paint, custom interior, rolling low and not so slow...