The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

62 short step · 06-08-2007, 01:56 PM

Measure from backing plate to backing plate on each axle to see if its the same length. If it is it should work, but you will probably have to weld the correct spring mounting plates on the new axle.

06-08-2007, 01:56 PM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 75 4x4 Rear End Measure from backing plate to backing plate on each axle to see if its the same length. If it is it should work, but you will probably have to weld the correct spring mounting plates on the new axle.