The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*trkklr77* · 06-09-2007, 01:50 AM

or you can buy the spindles, backing plates, and hubs from me.

the calipers are the same size but can be minorly different yours WILL work and work fine.

the older d44 uses a smaller inner bearing but the 10 bolt and 3/4t d44 spindles are the same.

the stub shaft will inter change.

06-09-2007, 01:50 AM	#6
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: Dana 44 6 lug to 8 lug or you can buy the spindles, backing plates, and hubs from me. the calipers are the same size but can be minorly different yours WILL work and work fine. the older d44 uses a smaller inner bearing but the 10 bolt and 3/4t d44 spindles are the same. the stub shaft will inter change.