Finally had a little time this afternoon to work on the truck and deal with the rear end being too high. The first picture shows the rear too high after the shackle flip installation weeks ago, while the second is how it wound up after removing one spring from the pack. The pictures do not serve justice but it was way tooooo high in the rear before. The spring that I removed was an unessential spring anyway that I had installed years ago to add height in order to get away from a tall lift block. After removing one boinger from each side, it looks completely level now.
Also tossed in pics of the ORD sway bar disconnects and Superlift 2’ drop drag link.