The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Mudder** · 06-19-2007, 10:18 AM

The don't really flex much and they are just bolted to that bottom lip. I dont think there is and down pressure at all on that lip. I would be more like pulling up on it. I am more worried about the two outside bolts. We put some large washers on them but am thinking they probably need some larger plates under the bolts to spread the force out a little more. Had thought about putting some 2" box along the top of that lip and may do it yet. I am just under a time thing right now, this week.

Those are designed to be bolted to the rocker and no way was I gonna do that.

06-19-2007, 10:18 AM	#3
Mudder Post Whore Join Date: Feb 2001 Location: East Central, MO Posts: 11,339	Re: ATTN: Yukon Jack The don't really flex much and they are just bolted to that bottom lip. I dont think there is and down pressure at all on that lip. I would be more like pulling up on it. I am more worried about the two outside bolts. We put some large washers on them but am thinking they probably need some larger plates under the bolts to spread the force out a little more. Had thought about putting some 2" box along the top of that lip and may do it yet. I am just under a time thing right now, this week. Those are designed to be bolted to the rocker and no way was I gonna do that. Last edited by Mudder; 06-19-2007 at 10:22 AM.