The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67Fleet · 07-01-2007, 12:57 PM

It's not that hard to remove the front coils. As mentioned, cutting 1 full coil off will net you about 2-3 inches. You need to remove them to cut them down, so buying new ones and installing them is no easier/harder. Out back if you do a flip kit, that's probably going to be more drop than you want. I'm not sure if anyone makes a drop shackle for those trucks, but if they do, I would do that. It will give you 2 inches.

07-01-2007, 12:57 PM	#7
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: lowering 68 gmc It's not that hard to remove the front coils. As mentioned, cutting 1 full coil off will net you about 2-3 inches. You need to remove them to cut them down, so buying new ones and installing them is no easier/harder. Out back if you do a flip kit, that's probably going to be more drop than you want. I'm not sure if anyone makes a drop shackle for those trucks, but if they do, I would do that. It will give you 2 inches. __________________ -Bret 67 short-fleet sold!