The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MPhillips · 07-03-2007, 07:03 PM

I have recently put up a 40'x60' shop & purchased '69, '71, and '72 blazers along w/'72 PU which all need various amount of work.

I have about 8 different catalogs, but would prefer buying good stuff from the people helping w/projects at this site if possible.

3 out of 4 of these trucks need threshold/floor replacement so I guess a suggestion on good quality sheetmetal for this phase would sure be appreciated.

Thanks again to all of the veteran builders who point us in the right direction!!!

Mike

07-03-2007, 07:03 PM	#1
MPhillips Registered User Join Date: Jun 2007 Location: Northern CA Posts: 16	Sheetmetal/parts sources I have recently put up a 40'x60' shop & purchased '69, '71, and '72 blazers along w/'72 PU which all need various amount of work. I have about 8 different catalogs, but would prefer buying good stuff from the people helping w/projects at this site if possible. 3 out of 4 of these trucks need threshold/floor replacement so I guess a suggestion on good quality sheetmetal for this phase would sure be appreciated. Thanks again to all of the veteran builders who point us in the right direction!!! Mike