Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10
On the truck itself, you need to remove the hood latch assembly from the truck. 4 bolts and it's off.
The instructions say to drill out the two dimples at the bottom of the radiator for the bottom bolts for the condenser assembly, but my holes were already there!
You need to use the bolts with rubber mounts for the bottom, the rubber part goes on the engine side.
When I went to install my condenser, I saw that the bolt holes wouldn't line up, so I drilled out the holes some, problem solved!
Reinstall your hood latch assembly putting the condenser bracket between the core support and the hood latch assembly.
Last edited by 67ChevyRedneck; 07-19-2007 at 11:48 AM.
|