Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10
You can see how the clamps are supposed to go together, I'm actually holding them upside down in the pic!
Open up the clips and put it around the lines.
I interlaced the clips so they held together a little better.
Bolt the clips to the supplied bracket and then bolt the bracket to the battery tray.
*Looking towards the firewall, the #6 line needs to be on the left and the #8 line needs to be on the right*
*Leave the bracket bolts loose until you do the next step, you may need to slide the lines a little bit.*
Last edited by 67ChevyRedneck; 07-19-2007 at 01:56 PM.
|