The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jonboy · 07-24-2007, 08:45 AM

I am not sure about #1, but #2 is correct. Since you do not have the torsion bar front, you really don't need to swap the front crossmember (unless you really want to), but you can just swap the control arms, spindles, etc.

07-24-2007, 08:45 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 64 Project in the desert I am not sure about #1, but #2 is correct. Since you do not have the torsion bar front, you really don't need to swap the front crossmember (unless you really want to), but you can just swap the control arms, spindles, etc.