Re: i lost the key for my locking gas cap....
i dont this about 2 years ago. i took an 1/8 inch drill and drilled out the key ways. then i took a 1/4 inch bit and re-drilled my 1/8 inch holes. then i took a straight head screw driver in the key ways and ,after some prying and manovering<spell? it came off. mine was a standard napa locking cap. and was double walled. if yours is not i wouldnt recommend drilling it out. im thinking pretty much all of them are double walled, beacause if i remember right, the lock cylinder doesnt just hang in the fill tube.... hope this may help. also you might want to try a large pair og channel locks and twist it off. i wouldnt think that it would damge the fill tube ,they are pretty stout, but what do i know..........tony
|