The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

red71cheyenne · 05-13-2002, 02:43 PM

I used the Duplicolor roll in stuff and it worked real well. An 8 foot bed took one and a half cans, but it comes with all the pads, rollers and everything for $39 a can. So far its held up real well, except for where I scraped it off hauling an engine. Good luck, Jeff.

------------------
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection
1969 K5 Blazer New project
1995 K1500 Sub(Mommas car)
1989 VW Golf(Beater)
Will be the daughters car if she will pay her insurance! Ha!

05-13-2002, 02:43 PM	#7
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	I used the Duplicolor roll in stuff and it worked real well. An 8 foot bed took one and a half cans, but it comes with all the pads, rollers and everything for $39 a can. So far its held up real well, except for where I scraped it off hauling an engine. Good luck, Jeff. ------------------ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer New project 1995 K1500 Sub(Mommas car) 1989 VW Golf(Beater) Will be the daughters car if she will pay her insurance! Ha! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty