The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BACKYARD88 · 08-10-2007, 04:28 PM

I ground mine to the frame with an eyelet and self drilling screw. As for wire size, I run parker valves and use the same gage wire they have on the solenoids already. I'd say 16-18 awg should be plenty big enough.

08-10-2007, 04:28 PM	#2
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Wire and ground for valves? I ground mine to the frame with an eyelet and self drilling screw. As for wire size, I run parker valves and use the same gage wire they have on the solenoids already. I'd say 16-18 awg should be plenty big enough. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting