The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Ogilthorpe · 08-14-2007, 08:56 PM

Here's some pics, hope they help. Basically a 1/4" rod (bent to fit) threaded one end to secure to pedal. I used an edelbrock adapter to hook it to the carb and to have some adjustment on length, but if you get the length right, you could just bend another 90 in the rod and attach directly to the carb. I did end up using a mounting hole close to the center of the pivot shaft on the carb like 3speed said.

08-14-2007, 08:56 PM	#7
Ogilthorpe Registered User Join Date: Apr 2007 Location: Colorado Posts: 65	Re: Help!!!! Here's some pics, hope they help. Basically a 1/4" rod (bent to fit) threaded one end to secure to pedal. I used an edelbrock adapter to hook it to the carb and to have some adjustment on length, but if you get the length right, you could just bend another 90 in the rod and attach directly to the carb. I did end up using a mounting hole close to the center of the pivot shaft on the carb like 3speed said.