The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jonboy · 08-15-2007, 05:54 PM

They are basically the same, but had two major changes. In 77 or 78, the main plug on the side was changed, but is easy to swap. If you are going to grab one out of a junkyard, just cut the wiring harness after the main long plug on the side of the column. The wipers went to the turn signal stalk in 84. Also, if you find a floor shift tilt column, those are more desirable to some folks looking to convert to floor shift.

08-15-2007, 05:54 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: tilt column questions They are basically the same, but had two major changes. In 77 or 78, the main plug on the side was changed, but is easy to swap. If you are going to grab one out of a junkyard, just cut the wiring harness after the main long plug on the side of the column. The wipers went to the turn signal stalk in 84. Also, if you find a floor shift tilt column, those are more desirable to some folks looking to convert to floor shift.