[earl87gta]

When it comes to cross over the drop pitman arm has nothing to do with the sive of lift it has to do with fram clearnce you have to use an arm that will not hit the frame when you turn.The arm faces the rear and they are splined so you can move them any were you want but if you were to flip your stock arm to the rear when you turn it would hit the frame. The easyest arm to get is one off a Yj but you will have to get it reamed out to use the chevy Tie rod end or drilled for a regular rod end. you can also use a manual steering arm from a 67 or 68 truck most kits use one off a ford truck but I cant remeber the years.