The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Getting ART arms

67Fleet · 09-04-2007, 11:17 AM

Hey, I've got bags front and rear and am going to be getting ART upper/lwr arms. I will be getting new drop spindles so my question is which should I get and which will work on my setup? I have a 6-lug disc conversion up front. Anything particular I need to know before I order? Also, what is your preference and why: Belltech 3" or ECE? Is there really much difference between the 3" and the 2-1/2 from ECE?

09-04-2007, 11:17 AM	#1
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Getting ART arms - what spindle? Hey, I've got bags front and rear and am going to be getting ART upper/lwr arms. I will be getting new drop spindles so my question is which should I get and which will work on my setup? I have a 6-lug disc conversion up front. Anything particular I need to know before I order? Also, what is your preference and why: Belltech 3" or ECE? Is there really much difference between the 3" and the 2-1/2 from ECE? __________________ -Bret 67 short-fleet sold!