The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sameyrasmea72 · 09-05-2007, 12:46 AM

I have a bb with 72 only mounts and stands,but the frontend cross member is off a 72 that came with a sb, and the stands when set on the frame and cross member, there is only 3 of the four holes in the frame and cross member. Can I just line up the other 3 and drill the 4th hole in the cross member...... Thanks Jason

09-05-2007, 12:46 AM	#1
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	BB motor mount ? I have a bb with 72 only mounts and stands,but the frontend cross member is off a 72 that came with a sb, and the stands when set on the frame and cross member, there is only 3 of the four holes in the frame and cross member. Can I just line up the other 3 and drill the 4th hole in the cross member...... Thanks Jason __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd Last edited by sameyrasmea72; 09-05-2007 at 06:13 AM.