|
Re: stock spindles
If you cut 1 round off the bottom of the front springs, you will have tween 2-3" of drop......& thats just about max on a spring drop (to keep good front geometry). Best bet on the lower drops , is a spindle/spring combo, or go with a spindle/ bag combo . You could run bags with stock spindles, but wont get the front to align properly if you go much more than 3" as ride height.  L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
Last edited by crazy longhorn; 09-09-2007 at 10:26 AM.
|