|
Re: ECE's Cup Holders!
5) Next is to clip on the new backer plate that will hold you door in place.
6) It slide over a notch from the top and then you flip it over and add 2 clips to secure the plate to the slid out cup holder.
7) Once that is done you simply clean the inside of your old door real well (I sanded mine and used a wax and grease remover) and stick it to the door mounting plate with the double back tape that comes already on the plate.
8) Then bend the tabs over the mounting plate and you are done with this step.
Kevin
LFD Inc.
|