|
Re: ECE's Cup Holders!
9) Then take your bracket that came out of the truck in step one and mark it and cut per the directions supplied in the kit.
10) After that you will cut out the two templets provided and mark the mounting holes in your bracket. Care must be taken with this step to make sure it lines up corectly once it is installed back in the truck.
11) The last step and the hardest is to re-install the modified bracket back into the truck and with your glove box removed used a mag screw driver and install the 4 supplied screws.
12) Replace the glove box, AC/Heater controll and give it a try.
Mine worked great and should help keep my water from rolling off the seat and dropping between the passenger door just when you want a sip.
Kevin
LFD Inc.
|