The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1969k10stepside · 09-22-2007, 03:17 PM

Unbolt the bed from the frame and move it back so you can have access to the front bolts.For the phillips screws,my cordless drill got them out.You will need to get the spotwelds off at the tailgate end that hold the floor to the sides but other then that it's just removing bolts.I've found with a impact just tighten them till they break as it's a PITA to unbolt them.

09-22-2007, 03:17 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: Taking the bed apart? Unbolt the bed from the frame and move it back so you can have access to the front bolts.For the phillips screws,my cordless drill got them out.You will need to get the spotwelds off at the tailgate end that hold the floor to the sides but other then that it's just removing bolts.I've found with a impact just tighten them till they break as it's a PITA to unbolt them.