The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - how do you remove ziebarting/undercoating

bad6772 · 09-26-2007, 05:10 PM

Lots of Elbow Grease lol, i just did all this on my PROJECT. first i used a small propane torch, it works well. i just ran the torch on the undercoating. and scrapped it off, i then followed with paint remover. then wire burshed the whole frame, and wet sanded the frame with laquer thinner as my wet.... worked great...........

09-26-2007, 05:10 PM	#7
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: how do you remove ziebarting/undercoating Lots of Elbow Grease lol, i just did all this on my PROJECT. first i used a small propane torch, it works well. i just ran the torch on the undercoating. and scrapped it off, i then followed with paint remover. then wire burshed the whole frame, and wet sanded the frame with laquer thinner as my wet.... worked great...........