The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

corn · 09-30-2007, 02:52 AM

If you loosen the front two pan bolts & carefully pry the cover off, you can re-install it when you are done in there. Make sure you put some silicone on the corners & tighten the pan bolts again after you get the cover back on...

09-30-2007, 02:52 AM	#2
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Removing Timing Cover If you loosen the front two pan bolts & carefully pry the cover off, you can re-install it when you are done in there. Make sure you put some silicone on the corners & tighten the pan bolts again after you get the cover back on...