The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**lolife99** · 10-01-2007, 03:57 PM

VDOG,... I can't really see where your bumpstops were removed. I would remove the rear rubber and metal bracket entirely. If you want a bumpstop in there use one of the small bolt on kind from Energy Suspension. On the front,... I always trim away the ENTIRE bumpstop bracket with the exception on the steering stop that touches the spindle. I also trim the lower a-arm to clear 15 inch rims. It looks like you have quality stuff on there. I would verify that you have short shocks. If they are for a stock height suspension, that could be part of the rough ride you are experiencing.

10-01-2007, 03:57 PM	#35
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: ECE drop springs ride quality VDOG,... I can't really see where your bumpstops were removed. I would remove the rear rubber and metal bracket entirely. If you want a bumpstop in there use one of the small bolt on kind from Energy Suspension. On the front,... I always trim away the ENTIRE bumpstop bracket with the exception on the steering stop that touches the spindle. I also trim the lower a-arm to clear 15 inch rims. It looks like you have quality stuff on there. I would verify that you have short shocks. If they are for a stock height suspension, that could be part of the rough ride you are experiencing. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-01-2007 at 04:00 PM.