Quote:
Originally Posted by bb1979
If your only doing springs in the front shouldn't need a ball joint separator just remove the brake caliper, unbolt the shock and remove the upper a arm from the frame (your going to need a wheel alignment anyway), have the truck on jack stands with the trolley jack under the lower a arm. Slowly lower away. I find its the fastest way to change front springs
|
You do not need to remove the upper A-arms to put in coil springs. All you need to do is unbolt the shock from the LCA, disconnect the LCA from the spindle (while supported by a jack), once disconnected, simply lower the LCA (with the jack)...the spindle and LCA will seperate...and the spring can be removed. Install is reverse order of removal.