[Duro5341]

The breather on my 10 bolt, goes from the original nipple, up along the frame rail about 2-3ft. This was to keep it out of the moisture of the stock location straight up on the frame rail. So the plasitc breather itself is about 1.5ft above the rear end

I am not currently having any oil leaks from the vent, or water issues like before. The stock nipple is above the oil level by about about 2.5". When I fill the new pan, I am not going over the stock fill hole....therefor the level won't be any higher than stock. So I think I shouldn't have any leaking issues, unless I am missing something here

Duro