The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

forsale · 10-26-2007, 02:07 PM

I bought a 69 c10 with LMC 67 front fenders and cowl hood. I am having notheing but trouble lining everything up. I started with my doors making a nice looking gap at the door/cab. Then installed the fenders doing the same gap. Now with the hood and the cowl on the outside corners of the hood are about 1" forward of the fenders. The hood pin wont go in the hole either.

I moved the hood back without the cowl on it but now the cowl wont fit.

Ditch the Hood? Hood and fenders?

10-26-2007, 02:07 PM	#1
forsale Registered User Join Date: Apr 2007 Location: Shingle springs, CA Posts: 51	Alignment of LMC front end I bought a 69 c10 with LMC 67 front fenders and cowl hood. I am having notheing but trouble lining everything up. I started with my doors making a nice looking gap at the door/cab. Then installed the fenders doing the same gap. Now with the hood and the cowl on the outside corners of the hood are about 1" forward of the fenders. The hood pin wont go in the hole either. I moved the hood back without the cowl on it but now the cowl wont fit. Ditch the Hood? Hood and fenders?