The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

13lazer · 11-09-2007, 01:25 AM

the best way to rewire these trucks is to get a few donor harnesses from ebay or the junkyard. lay the harni out on a table and repair the best one with pieces from the other ones. look for burned wires and corrosion at the plugs. i once got a boxfull of good factory wires and connectors out of a junked 1977 chevette. use solder and heat shrink, chevy trucks are very easy to rewire.

11-09-2007, 01:25 AM	#9
13lazer 13lazers' blazers Join Date: Jul 2005 Location: San Pedro, CA Posts: 152	Re: GMC Wiring Harness the best way to rewire these trucks is to get a few donor harnesses from ebay or the junkyard. lay the harni out on a table and repair the best one with pieces from the other ones. look for burned wires and corrosion at the plugs. i once got a boxfull of good factory wires and connectors out of a junked 1977 chevette. use solder and heat shrink, chevy trucks are very easy to rewire. __________________ 1970 2wd blazer 1972 1ton blazer 4x4 in progress 1966 mustang coupe (modified) 1985 c20 suburban tow rig 1996 462 ranger with a 150 efi merc. a former B.A.S.S. tournament boat almost all exempt from california smog laws intentionally.