Re: 84 Guage cluster with TACH!!!!
hey fellas, i'm not tryig to take anything away from davidh cause it's a afair price, but always look at that lower cable guide for the gear indicator if you have an automatic. notice this one is broken and there is nothing permanent you can do to fix that. You have to find another way route for your cable.
whiskey- good catch on the left tab, a lot of people on ebay purposely dont show that ,BUT that left tab doesn't mean a whole lot. the way the lower part of the cluster tucks in behind the metal dash does not allow the cluster to move around a lot. You can also make a small metal tab bent 90* and screw it to the side of the plastic if you really want to. the tabs to worry about are the top two towers. they are the ones that are a real pain to fix if they are broken and they hold the gauge bezel on.
Tachs are very easy to test at home also. expensive to repair though if bad. crossy
__________________
"been there, done that, ruined the T-shirt".
2007 LBZ GMC Sierra, ECSB
2006 LM7 RCSB Silverado
98 Vortec project.
94,3500,6.5L 4L80
81 SWB GMC POS finally gone
73 Pinto, stock, w/CragarSS's-eww 
84,C10 SWB-Yella,stock
86 K10 SWB-Red, hopped up 305,4/S
LOTS of Cummins trucks.
Last edited by crossy; 11-12-2007 at 09:16 PM.
|