The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Scrub · 05-16-2002, 08:10 PM

The top of the bed has a rolled piece. That rolled piece should be about an inch away from the back of the cab.
Measure in the front bed below the center of the rear window. it should be pretty uniform.

------------------
Scrub
70 GMC 1,000,000 + miles
72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

[This message has been edited by Scrub (edited May 16, 2002).]

05-16-2002, 08:10 PM	#2
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	The top of the bed has a rolled piece. That rolled piece should be about an inch away from the back of the cab. Measure in the front bed below the center of the rear window. it should be pretty uniform. ------------------ Scrub 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends. [This message has been edited by Scrub (edited May 16, 2002).] __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.