Quote:
Originally Posted by Yukon Jack
Put the double wall top back on my 70 K5 on Sunday. The bolt that goes through the visor into the top won't tighten down - the nut inside the top appears to be just spinning. It's doing this on both the driver's and passenger side.
Any suggestions on a fix to this problem? I tried to put some pressure on the bolt to the side and also tried to hold it down to see if I could get the nut to stop spinning, but no luck.
|
Bad news. I had one do that in my Jimmy before we painted it. What happens is the blind nuts work loose inside their enclosures in the windshield frame. You will really need to cut them out and replace them...
