The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hey Guys need alittle help on looking at a 64 Panel.

steverino66 · 11-22-2007, 09:41 PM

Remove the screws and look under the door sill plates even if the rockers look solid.
Look closely at the fender braces behind the front wheel inside the fender's back edge.
Bottom edges of the kick panels, inside where the floors meet the corners, and underneath the battery and its tray. Where the inner fenders meet the radiator brace.
May be others specific to panels? Good luck.

11-22-2007, 09:41 PM	#2
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: Hey Guys need alittle help on looking at a 64 Panel. Remove the screws and look under the door sill plates even if the rockers look solid. Look closely at the fender braces behind the front wheel inside the fender's back edge. Bottom edges of the kick panels, inside where the floors meet the corners, and underneath the battery and its tray. Where the inner fenders meet the radiator brace. May be others specific to panels? Good luck.