The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70 Jimmy · 05-16-2002, 08:50 PM

You can put the axle above the springs and make a "pad" for the bottom of the axle. It should look just like the other pad but reach around the axle and rest on "bottom" of the old pad. Looks alot like a mini C notch. I have a set but I can't get to them to take a pic. Hmmmm... it looks like this but one peice. [_] The axle will fit between these and the bracket will rest on the bottom of the existing pad. The leafs will be at the bottom of all of this. It must seem like I'm babbling but they do exist!

------------------
"KEEP IT DOWN!"
70 Jimmy 454 2wd
56 GMC Big Window

[This message has been edited by 70 Jimmy (edited May 16, 2002).]

[This message has been edited by 70 Jimmy (edited May 16, 2002).]

05-16-2002, 08:50 PM	#6
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	You can put the axle above the springs and make a "pad" for the bottom of the axle. It should look just like the other pad but reach around the axle and rest on "bottom" of the old pad. Looks alot like a mini C notch. I have a set but I can't get to them to take a pic. Hmmmm... it looks like this but one peice. [_] The axle will fit between these and the bracket will rest on the bottom of the existing pad. The leafs will be at the bottom of all of this. It must seem like I'm babbling but they do exist! ------------------ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window [This message has been edited by 70 Jimmy (edited May 16, 2002).] [This message has been edited by 70 Jimmy (edited May 16, 2002).] __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"